Solvent Weld Waste Fittings
Solvent weld waste fittings are manufactured to fit two parts together via solvent cement solution, particularly pipes and fittings. Solvent is applied to both parts, the outside of the pipe and inside of the fitting, then both are pushed together and twisted. This ensures a tight fit and seal, forming a permanent weld between each fitting. The fitting type is often used in areas where there is a higher risk of impact on systems, like public buildings.
Solvent weld fittings are available in various sizes, including 32mm solvent weld pipe, 40mm solvent weld straight connector, 50mm solvent weld fittings and more. You can also find different types, such as adaptors, tees, reducers or other fitting styles. We’ve got you covered.
Check out our range of solvent weld waste fittings below at Plumbing Superstore from leading brands like FloPlast. Click the product links to learn more or contact our excellent customer service team if you need advice on finding the right solvent welding fitting for your requirements. Use the helpline or open the live chat in the bottom right for support.
Fitting a new waste pipe system? Don't forget these to complete your project:
Need more information about solvent welding and waste fittings? Check out our handy guides below:
Products in Solvent Weld Waste Fittings:
Showing 1 - 20 of 20 products
Our recommendations
Floplast White Solvent Weld Male Adaptor - 32mm
£3.42 incl VAT
Floplast White Solvent Weld Level Invert Reducer - 40mm x 32mm
£2.04 incl VAT
You Save: £0.24
Was:
£2.28
FloPlast White Solvent Weld Female Adaptor - 40mm
£2.99 incl VAT
Floplast Solvent Weld 90 Degree Knuckle Elbow
More Options
£1.26 incl VAT
You Save: £0.14
Was:
£1.40
Floplast Solvent Weld 135 Degree Obtuse Elbow
More Options
£1.38 incl VAT
You Save: £0.24
Was:
£1.62
Floplast Solvent Weld 90 Degree Conversion Bend
More Options
£1.10 incl VAT
You Save: £0.51
Was:
£1.61
Showing 1-20 of 20
